Kyocera FS-1024MFP

Default Setting (System Menu)
OPERATION GUIDE 8-59
8
Printer Settings
Printing from computers, settings are generally made on the application software screen. However, the following
settings are available for configuring the defaults to customize the machine.
• EcoPrint …8-59
• Override A4/LTR …8-60
• Copies …8-60
• Orientation …8-61
• FormFeed Timeout …8-62
• LF Action …8-63
• CR Action …8-64
NOTE: If user login administration is enabled, you can only change the settings by logging in with
administrator privileges.
EcoPrint
EcoPrint conserves toner when printing. This is recommended for test copies where faded printing is not a
problem.
Use the procedure below to specify the EcoPrint setting.
1 In the Sys. Menu/Count. menu, press the U or V
key to select [Printer].
2 Press the OK key. The Printer menu appears.
3 Press the U or V key to select [EcoPrint].
4 Press the OK key. EcoPrint appears.
5 Press the U or V key to select [Off] or [On].
Sys. Menu/Count.: a b
5 Common Settings
6 Copy
*********************
[ Exit ]
7 Printer
Printer: a b
*********************
2 Override A4/LTR
3 Copies
[ Exit ]
1 Eco Print
EcoPrint: a b
*********************
2 On
1 *Off