Kyocera FS-1024MFP

Scanning Image to USB
6-4 OPERATION GUIDE
Original Size
Select the size of originals that will serve as the basis for scanning. Be sure to select the original size before
starting the sending process.
Choose the original size from the following groups of original size.
Use the procedure below to select the original size when sending scanned images.
1 Press the Scan to USB key.
2 Press the U or V key to select [Store File].
3 Press the OK key. The basic screen appears.
4 Place the originals on the platen.
5 Press the Function Menu key. Function Menu
appears.
6 Press the U or V key to select [Original Size].
7 Press the OK key. Original Size appears.
8 Press the U or V key to select the desired original
size and then press the OK key.
Item Detail Size
Standard
Sizes
Select from standard sizes. Letter, Legal, Statement, Executive, Oficio II, A4, A5, A6,
B5, B6, Folio, 16K
Others Select from Hagaki and
Custom Original Size *.
* Regarding the setting method of Custom Original Size, refer to Custom Original Size Setup on page 8-7.
ISO B5, Envelope #10, Envelope #9, Envelope #6,
Envelope Monarch, Envelope DL, Envelope C5, Hagaki,
Oufuku Hagaki, Youkei 4, Youkei 2 and Custom
Function Menu: a b
*********************
2 Original Size T
3
Original Image T
[ Exit ]
1 Color Selection T
Original Size: a b
*********************
2 Legal q
3
Statement q
1 *Letter q