Kyocera FS-1024MFP

Scanning Image to USB
OPERATION GUIDE 6-21
6
Removing USB Memory
Remove the USB memory.
IMPORTANT: Be sure to follow the proper procedure to avoid damaging the data or USB memory.
1 Press the Scan to USB key. The USB Memory
menu appears.
2 Press [Menu] (the Left Select key). A menu
appears.
NOTE: This is the image on the screen when a folder
is selected. [Open] is not displayed when a file is
selected.
3 Press the U or V key to select [Remove Memory].
4 Press the OK key. A confirmation message
appears.
5 Press [OK] (the Right Select key) or remove the
USB memory. The screen returns to the basic
screen.
USB Memory: a b
*********************
i Folder-1
j File.pdf
[ Menu ] [ Select ]
1 Store File
Menu(Folder): a b
*********************
2 Remove Memory
1 Memory Detail
USB memory can be
safely removed.
[OK ]