Kyocera FS-1024MFP

Basic Operation
3-6 OPERATION GUIDE
One-Touch Keys (Available only in FS-1124MFP)
The one-touch keys and program keys on the operation panel are described below.
One-Touch Key
Register destinations to one-touch keys, and you can enter the desired destination by pressing the applicable
one-touch key. For registering a destination to a one-touch key, refer to Adding a Destination on One-touch
Key on page 8-84.
Entering Destination with One-touch Key
1 In Address Entry, press the one-touch key where
the desired destination is registered.
Recalling from One-touch Keys 1 to 4
Press the one-touch key where the destination is
registered.
2 The destination registered to the one-touch key is
recalled and automatically entered on the screen.
IMPORTANT: Any destination already entered is
overwritten.
Recalling Settings
Press the one of the Program 1 to 4 keys where the settings you want to recall are registered. The current
settings of various functions are replaced with the registered settings.
FAX No. Entry: B b
*
[ Chain ] [ Detail ]
FAX No. Entry A b
0123456789
*
[ Chain ] [ Detail ]