Kyocera FS-1024MFP

Default Setting (System Menu)
8-4 OPERATION GUIDE
Default Screen
Select the screen appearing right after start-up (default screen). The options are as follows.
The table below lists the available screens.
Use the procedure below to select the default startup screen.
1 In the Sys. Menu/Count. menu, press the U or V
key to select [Common Settings].
2 Press the OK key. The Common Settings menu
appears.
3 Press the U or V key to select [Default Screen].
4 Press the OK key. Default Screen appears.
5 Press the U or V key to select the default screen.
6 Press the OK key. Completed. is displayed and the
screen returns to the Common Settings menu.
Item Description
Status The Status/Job Cancel screen (the screen shown when the Status/Job Cancel
key is pressed) appears.
Copy The Copy screen (the screen shown when the Copy key is pressed) appears.
FAX The FAX screen (the screen shown when the FAX key is pressed) appears.
Sys. Menu/Count.: a b
3 System
4 Administrator
*********************
[ Exit ]
5 Common Settings
Common Settings: a b
1 Language
*********************
3 Sound
[ Exit ]
2 Default Screen
Default Screen: a b
1 Status
*********************
3 FAX
2 *Copy