Kyocera FS-1024MFP

Status / Job Cancel
OPERATION GUIDE 7-15
7
FAX
The information (sending, waiting, etc.) is displayed.
If you press [Log] (the Right Select key), the Log
menu appears. From this screen, you can check or
print the transmission/reception history.
Handling the Devices (USB Memory)
1 Press the Status/Job Cancel key. The Status
menu appears.
2 Press the U or V key to select [USB Memory].
3 Press the OK key. This displays the status of the
USB memory.
Press the Y or Z key to switch the display to other
information items. The items displayed are as
follows:
Capacity
Used Area
Free Space
When you press [Remove] (the Left Select key), a
confirmation screen appears and you can remove
the USB memory.
4 Press the OK key. The screen returns to the Status
menu.
Log: a b
*********************
2 Incoming FAX Log
3 Outgoing FAX Rpt
1 Outgoing FAX Log
Status: a b
; Toner Status
< Paper Status
*********************
[ Pause ]
= USB Memory
USB Memory: C b
Capacity: 1/3
512.0MB
[ Remove ]
USB memory can be
safely removed.
[OK ]