Kyocera FS-1024MFP - Page 184

Default Setting (System Menu)
8-38 OPERATION GUIDE
2 Press the OK key. The Common Settings menu
appears.
3 Press the U or V key to select [Function Default].
4 Press the OK key. The Function Default menu
appears.
5 Press the U or V key to select [Original Image].
6 Press the OK key. Original Image appears.
7 Press the U or V key to select [Text+Photo],
[Photo], [Text] or [for OCR].
8 Press the OK key. Completed. is displayed and the
screen returns to the Function Default menu.
Density
Set the default density. The available default settings are shown below.
Use the procedure below to select the default zoom setting.
1 In the Sys. Menu/Count. menu, press the U or V
key to select [Common Settings].
Common Settings: a b
*********************
2 Default Screen
3 Sound
[ Exit ]
1 Language
Function Default: a b
*********************
2 Scan Resolution
3 FAX Resolution
[ Exit ]
1 Color Selection
Original Image: a b
*********************
2 Photo
3 Text
1 *Text+Photo
Item Description
Manual (Normal 0) Set to (Normal 0) in the Manual density.
Auto Set to Auto density.
Sys. Menu/Count.: a b
3 System
4 Administrator
*********************
[ Exit ]
5 Common Settings