Kyocera FS-1024MFP

Default Setting (System Menu)
OPERATION GUIDE 8-51
8
Border Line
Select the default value for border line when [2 in 1] is selected for Combine. Items available for the default value
are as follows:
Use the procedure below to select the default value for border line.
1 In the Sys. Menu/Count. menu, press the U or V
key to select [Common Settings].
2 Press the OK key. The Common Settings menu
appears.
3 Press the U or V key to select [Function Default].
4 Press the OK key. The Function Default menu
appears.
5 Press the U or V key to select [Detail Setting].
6 Press the OK key. The Detail Setting menu
appears.
7 Press the U or V key to select [Border Line].
Item Description
None No border line.
l Solid Line Draws solid border lines.
m Dotted Line Draws dotted border lines.
n Positioning Mark Puts a mark on the border line position.
Sys. Menu/Count.: a b
3 System
4 Administrator
*********************
[ Exit ]
5 Common Settings
Common Settings: a b
*********************
2 Default Screen
3 Sound
[ Exit ]
1 Language
Function Default: a b
*********************
2 Scan Resolution
3 FAX Resolution
[ Exit ]
1 Color Selection
Detail Setting: a b
*********************
2 4 in 1 Layout
3 Border Line
[ Exit ]
1 2 in 1 layout