Kyocera FS-1024MFP - Page 238

Default Setting (System Menu)
8-92 OPERATION GUIDE
7 Press the OK key. USB Device appears.
8 Press the U or V key to select [Unblock] or [Block].
9 Press the OK key. Completed. is displayed and the
screen returns to the System menu.
Optional interface (Optional interface card setting)
This locks and protects the optional interface slot (FAX board). The default setting is Unblock.
NOTE: This setting is displayed on FS-1124MFP.
Use the procedure below to specify the optional interface setting.
1 In the Sys. Menu/Count. menu, press the U or V
key to select [System].
A login screen will appear. Then, enter the login
user name and password with device administrator
privileges to log in, and press [Login] (the Right
Select key).
The default setting of login user name and
password is 2400.
2 Press the OK key. The System menu appears.
3 Press the U or V key to select [I/F Block Set.].
USB Device: a b
*********************
2 Block
1 *Unblock
Sys. Menu/Count.: a b
1 Report
2 Counter
*********************
[ Exit ]
3 System
Login User Name: L b
*******************
Login Password:
[ Login ]
System: a b
*********************
2 Restart
[ Exit ]
1 I/F Block Set.