Preparation before Use
OPERATION GUIDE 2-15
2
Setting the WIA Driver (Windows Vista™, Windows® Server 2008 and Windows 7)
Register this machine to the WIA Driver.
NOTE: The following is not necessary to register when using the machine possesses an IP address or host
name that you have specified during installation of WIA Driver.
1 Click Start, Control Panel and then Scanners and Cameras. For Windows 7, in the search box, type
scanners and cameras, and then click Scanners and Cameras.
2 Select the same name as this machine from WIA Drivers, and press Properties.
NOTE: If Windows Security and User Account Control are displayed, no trouble should be found with
operation after installing the driver and software we have provided. Continue installation.
3 Click the Settings tab and select Image Compression and the Compression Level.
4 Click OK.
5 Click Close.
The machine is registered to the PC.
To Next Page
Loading...
