Kyocera FS-1024MFP

Preparation before Use
2-26 OPERATION GUIDE
12 Press the OK key. Cassette 1 Type appears.
13 Press the U or V key to select the desired paper
type and then press the OK key.
Completed. is displayed and the screen returns to
the Cassette 1 Set. menu.
Specifying Paper Size and Media Type for the Manual Feed
To fix the type of paper to be used in the manual feed, specify the paper size.When using other than a plain
paper, specify the media type.
1 Press the System Menu/Counter key on the main
unit operation panel.
2 In the Sys. Menu/Count. menu, press the U or V
key to select [Common Settings].
Cassette 1 Type: a b
*********************
2 Rough
3 Recycled
1 *Plain
Item Description
Paper
Size
Standard
Sizes
Select from the standard sizes. Selectable paper sizes are as follows.
Inch size: Letter, Legal, Statement, Executive, and Oficio II
Metric size: A4, A5, A6, B5, B6, Folio and 16K
Others Select from special standard sizes and custom sizes.
Selectable paper sizes are as follows.
ISO B5, Envelope #10 (Commercial #10), Envelope #9 (Commercial #9),
Envelope #6 (Commercial #6 3/4), Envelope Monarch, Envelope DL, Envelope C5,
Hagaki, Oufuku Hagaki, Youkei 4, Youkei 2, Custom*
*Refer to Adding a Custom Size for Paper to Print on page 8-9 for selecting Custom Paper Size.
Media Type Selectable media types are as follows.
Plain, Transparency, Rough, Vellum, Labels, Recycled, Preprinted, Bond, Cardstock,
Color, Prepunched, Letterhead, Envelope, Thick, High Quality and Custom 1~8**
** To change to a media type other than Plain, refer to Paper Weight on page 8-15.
Sys. Menu/Count.: a b
3 System
4 Administrator
*********************
[ Exit ]
5 Common Settings