Kyocera FS-1024MFP

Basic Operation
3-12 OPERATION GUIDE
The procedure for using zoom copying is explained below.
1 Press the Function Menu key. Function Menu
appears.
2 Press the U or V key to select [Zoom].
3 Press the OK key. Zoom appears.
4 Press the U or V key to select the desired
magnification.
To copy in the same size as the original, select
[100%].
To select automatic zoom, select [Auto].
To use fixed magnifications, select [Standard
Zoom] and press the OK key. Standard Zoom
appears. Press the U or V key to select the
desired magnification. If you select [Other] and
press the OK key, you can select from additional
magnifications.
To enter a magnification, select [Zoom Entry] and
press the OK key. Zoom Entry appears. Use the
numeric keys to enter the any magnification.
5 Press the OK key. Completed. is displayed and the
screen returns to the basic screen.
6 Press the Start key. Copying begins.
NOTE: Press the Reset key to reset the settings
selected in Function Menu.
Function Menu: a b
*********************
2 Zoom T
3
Combine T
[ Exit ]
1 Collate T
Zoom: a b
*********************
2 Auto
3 Standard Zoom
1 *100%
Standard Zoom: a b
4 129% STMT >> LTR
*********************
6 78% LGL >> LTR
5 *100%
Zoom Entry: D b
(25 - 400)
*****100 %