Kyocera FS-1028MFP User Manual

Sending Functions
5-16 OPERATION GUIDE
Continuous Scan
When the multi-page originals cannot be placed in the document processor at one time, the originals can be
scanned in separate batches and then sent as one job. With this function, originals can be scanned one after
another until you press [End Scan] (the Right Select key).
The procedure for using continuous scanning when sending scanned images is explained below.
1 Press the Send key.
2 Press the Function Menu key. Function Menu
appears.
3 Press the U or V key to select [Continuous Scan].
4 Press the OK key. Continuous Scan appears.
5 Press the U or V key to select [On] and then press
the OK key.
Completed. is displayed and the screen returns to
the basic screen for sending.
6 Specify the destination.
7 Place the original, and press the Start key.
8 Place the next original, and press the Start key.
Scan the remaining originals by the same
procedure.
When you have scanned all the originals, press
[End Scan] (the Right Select key) to start sending.
Function Menu: a b
*********************
2 Original Size T
3
Original Image T
[ Exit ]
1 Color Selection g
Continuous Scan: a b
*********************
2 On
1 *Off

Kyocera FS-1028MFP Specifications

General

Duplex printing	Yes
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	6 s
Print speed (black, normal quality, A4/US Letter)	28 ppm
Grayscale levels	256
Maximum copy resolution	600 x 600 DPI
Time to first copy (black, normal)	6.9 s
Internal memory	256 MB
Dimensions (WxDxH)	494 x 410 x 366 mm
Power requirements	220 - 240
All-in-one functions	Copy, Scan
Maximum internal memory	0.768 GB
Compatible operating systems	Windows 2000/XP/Server2003/Vista/7/Server2008
Duty cycle letter size (maximum)	2800 pages per month
Standard interfaces	USB 2.0
Power consumption (standby)	88 W
Power consumption (average operating)	494 W
Non-ISO print media sizes	Folio
Maximum duty cycle	20000 pages per month
Market positioning	Business