Kyocera FS-1028MFP

Sending Functions
OPERATION GUIDE 5-15
5
Color / Grayscale / Black and White Selection
This feature allows you to select the select the color mode used for scanning when sending images. You can
select from Full Color, Grayscale or Black & White.
Use the procedure below to select the color mode when sending scanned images.
1 Press the Send key.
2 Place the originals on the platen.
3 Press the Function Menu key. Function Menu
appears.
4 Press the U or V key to select [Color Selection].
5 Press the OK key. Color Selection appears.
6 Press the U or V key to select the desired color
mode.
7 Press the OK key.
Completed. is displayed and the screen returns to
the basic screen for sending.
8 Specify the destination, and press the Start key to
start sending.
Function Menu: a b
*********************
2 Original Size T
3
Original Image T
[ Exit ]
1 Color Selection g
Color Selection: a b
*********************
2 Grayscale
3 Black & White
1 *Full Color