Kyocera FS-1028MFP

Default Setting (System Menu)
OPERATION GUIDE 8-57
8
Copy Settings
The following settings are available for copying functions.
• Photo Processing …8-57
• Paper Selection …8-58
• Auto Paper Selection …8-59
• Auto % Priority …8-59
• Select Key Set …8-61
NOTE: If user login administration is enabled, you can only change the settings by logging in with
administrator privileges.
Photo Processing
Set the resolution for copying a photo.
Use the procedure below to set Photo Processing.
1 In the Sys. Menu/Count. menu, press the U or V
key to select [Copy].
2 Press the OK key. The Copy menu appears.
3 Press the U or V key to select [Photo Processing].
4 Press the OK key. Photo Processing appears.
Item Description
Dithering(Normal) Sets the resolution to standard.
Dithering(Rough) Sets the resolution to low.
Sys. Menu/Count.: a b
*********************
8 Printer
9 Send
[ Exit ]
7 Copy
Copy: a b
*********************
2 Paper Selection
3 AutoPaperSelect.
[ Exit ]
1 Photo Processing
Photo Processing: a b
*********************
2 Dithering(Rough)
1 *Dithering(Normal)