Basic Operation
OPERATION GUIDE 3-33
3
Program (Copying, Sending and Faxing)
Settings of various functions frequently used for copying and sending can be collectively registered as a
program. Then, you can change the current settings of various functions to the registered settings by just
pressing one of the Program 1 to 4 keys.
NOTE:
The following functions are already registerd in
Program 1
key.
Zoom Options: Auto Zoom
Combine: 2 in 1
Continuous Scan: On
Paper Selection: Cassette 1
Although the functions are deleted by overwriting
Program 1
key, you can register the same settings using the
Function Menu
key.
Registering Settings
After making settings, press and hold the one of the
Program 1 to 4 keys where you want to register the
settings for 3 seconds. The current settings are
registered to the selected program key.
Changing and Deleting Settings
1 Press and hold the one of the Program 1 to 4 keys
where the settings you want to change/delete are
registered for 3 seconds. Menu appears.
2 To replace the registered settings with the current
settings, press the U or V key to select [Overwrite]
and then press the OK key. A confirmation screen
appears. Press [Yes] (the Left Select key) to
change the settings.
To delete the registered settings, press the U or V
key to select [Delete] and then press the OK key. A
confirmation screen appears. Press [Yes] (the Left
Select key) to delete the registered settings.
To Next Page
Loading...
