Kyocera FS-1028MFP

Default Setting (System Menu)
8-126 OPERATION GUIDE
Restarting the System
Restart the printer without turning the main power
switch off. Use this to deal with any unstable operation
by the machine. (Same as the computer restart.)
Use the procedure below to restart the system.
1 In the Sys. Menu/Count. menu, press the U or V
key to select [System], and press the OK key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the user ID and password to log in, and
press [Login] (the Right Select key).
2 The System menu appears.
3 Press the U or V key to select [Restart].
4 Press the OK key. A confirmation screen appears.
5 Press [Yes] (the Left Select key). The printer is
restarted.
If you press [No] (the Right Select key), the printer
does not restart and the screen returns to the
System menu.
Sys. Menu/Count.: a b
1 Report
2 Counter
*********************
[ Exit ]
3 System
Login User Name: L b
*******************
Login Password:
[ Login ]
System: a b
3 Security Level
*********************
5 Op Functions
[ Exit ]
4 Restart
Restart.
Are you sure?
[ Yes ] [ No ]