Basic Operation
3-6 OPERATION GUIDE
Login/Logout
If user login administration is enabled, it is necessary to enter the login user name and password to use the
machine.
NOTE: You will be unable to log in if you forget your login user name or login password. In this event, log in
with administrator privileges and change your login user name or login password.
Login
NOTE: Refer to Character Entry Method on Appendix-5 for details on entering characters.
1 If the screen shown appears during operations,
enter the login user name.
2 Press the V key. The input cursor moves to Login
Password.
3 Enter the login password.
Press the U key to move the input cursor to Login
User Name.
4 Check the login user name and password are
correct, and press [Login] (the Right Select key).
Logout
To logout from the machine, press the Logout to return
to the login user name/password entry screen.
To Next Page
Loading...
