Basic Operation
OPERATION GUIDE 3-9
3
Copying
Follow the steps as below for basic copying.
1 Press the Copy key when the Copy key/indicator
is off.
NOTE: If the Message Display is turned off, press the
Power key and wait for the machine to warm up.
2 Place the originals on the platen or in the optional
document processor.
NOTE: For loading instructions, refer to Loading
Originals on page 2-42.
3 The paper source for copying is the location
displayed on the panel.
When you need to change the paper source, use
the Paper Selection menu. If [Auto] is selected, the
most suitable paper source is automatically
selected.
For specifying the paper source, refer to Paper
Selection on page 4-4.
4 Use the numeric keys to enter the copy quantity.
Specify the desired number up to 999.
To Next Page
Loading...
