Kyocera FS-1028MFP

Default Setting (System Menu)
OPERATION GUIDE 8-83
8
2 Press the OK key. The Adjust/Maint. menu
appears.
3 Press the U or V key to select [Service Setting].
4 Press the OK key. Service Setting appears.
5 Press the U or V key to select [Service Status] or
[Network Status].
6 Press the OK key. A confirmation screen appears.
The screen shown is the one when Network Status
is selected.
7 Press [Yes] (the Left Select key). The selected
report is output. Accepted. is displayed and the
screen returns to the Adjust/Maint. menu.
NOTE: When acceptance of jobs is prohibited, Print, storing functions are restricted now. is displayed and the
output is canceled.
Adjust/Maint.: a b
*********************
2 Send/Box Density
3 Correct. Bk Line
[ Exit ]
1 Copy Denst. Adj.
Service Setting: a b
*********************
2 Network Status
3 New Developer
[ Exit ]
1 Service Status
Print.
Are you sure?
z Network Status
[ Yes ] [ No ]