Kyocera FS-1028MFP

Management
11-14 OPERATION GUIDE
Completed. is displayed and the screen returns to
the User/Job Account menu.
Unknown login user name Job
This specifies the behavior for handling the jobs sent with unknown login user names or User ID (i.e. unsent
IDs). If the User Login is set to invalid and Job Accounting is set to valid, follow the procedure when the Account
ID is unknown.
The table below shows the available settings.
Use the procedure below to process jobs sent from unknown users.
NOTE: Refer to Character Entry Method on Appendix-5 for details on entering characters.
1 Press the System Menu/Counter key on the main
unit operation panel.
2 In the Sys. Menu/Count. menu, press the U or V
key to select [User/Job Account], and then press
the OK key.
3 If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to log in with administrator
privileges. Refer to Adding a User on page 11-6 for
the default login user name and password.
4 In the User/Job Account menu, press the U or V
key to select [Unknown ID Job].
Item Description
Reject The job is rejected (not printed).
Permit The job is permitted to be printed.
Sys. Menu/Count.: a b
*********************
5 User Property
6 Common Settings
[ Exit ]
4 User/Job Account
Login User Name L b
*******************
Login Password:
[ Login ]
User/Job Account: a b
1 User Login Set.
2 Job Account. Set.
*********************
[ Exit ]
3 Unknown ID Job