Kyocera KM-1820

1-3-3
3JG
Section
Item
Maintenance item contents
Initial
No. setting
Fax U650 Setting modem 1
• Setting the G3 transmission cable equalizer —
• Setting the G3 reception cable equalizer —
• Setting the modem detection level —
U651 Setting modem 2
• Setting the modem output level —
• Setting the DTMF (high-frequency group) output level —
• Setting the DTMF (low-frequency group) output level —
U660 Setting the NCU
• Setting the connection to PBX/PSTN —
• Setting PSTN dial tone detection —
• Setting busy tone detection —
• Setting for a PBX —
U670 Outputting lists
• Settings list —
• Action list —
• Own-status report —
• Protocol list —
• Error list —
U680 Transmission modem output —
U681 V.34 test mode —
U682 Tonal test mode —
U683 DTMF signal test mode —
U684 Board test mode —
U685 Relay test mode —
U690 10 pps dial test mode —
U691 20 pps dial test mode —
U692 DTMF dial test mode —
U693 Transmission time test mode —
U699 Setting the software switches —