Kyocera KM-1820

Maintenance
Description
item No.
3JG
1-3-10
U625 Setting the trasmission system
Description
Makes settings for the auto redialing interval and the number of times of auto redialing.
Purpose
Change the setting to prevent the following problems: fax transmission is not possible due to too short redial
interval, or fax transmission takes too much time to complete due to too long redial interval.
Start
1. Press the enter key.
2. Select the item to be set using the up/down cursor keys.
Display Description
1:INTERVAL Sets the auto redialing interval.
2:TIMES Sets the number of times of auto redialing.
Setting the auto redialing interval
1. Change the setting using the left/right cursor keys.
Description Setting range
Redialing interval 1 to 9 (min.)
2. Press the enter key. The value is set.
Setting the number of times of auto redialing
1. Change the setting using the left/right cursor keys.
Description Setting range
Number of redialing 0 to 9
When set to 0, no redialing is performed.
2. Press the enter key. The value is set.
Completion
Press the back key. The screen for selecting a maintenance item No. is displayed.
U620 Setting the communication system
Description
Sets the signal detection method for remote switching. Be sure to change the setting according to the type of
telephone connected to the machine.
Method
1. Press the enter key. The screen for selecting an item is displayed.
2. Press the enter key.
3. Change the setting using the up/down cursor keys.
Display Description
1: ONE One-shot detection
2: CONT Continuous detection
4. Press the enter key. The value is set.
5. To return to the screen for selecting an item, press the back key.
Completion
Press the back key at the screen for selecting an item. The screen for selecting a maintenance item No. is
displayed.