Kyocera KM-1820

3JG
1-3-9
Maintenance
Description
item No.
U612 Setting system 3
Description
Makes settings for fax transmission regarding operation and automatic printing of the protocol list.
Start
1. Press the enter key. The screen for selecting an item is displayed.
2. Select the item to be set using the up/down cursor keys.
3. Press the enter key. The screen for the selected item appears.
Display Description
1:AUTO REDU Selects if auto reduction in the auxiliary directionis
to be performed.
2:PROTOCOL LIST Sets the automatic printing of the protocol list.
Selecting if auto reduction in the auxiliary direction is to be performed
Sets whether to receive a long document by automatically reducing it in the auxiliary direction or at 100%
magnification.
1. Change the setting using the up/down cursor keys.
Display Description
1: ON Auto reduction is performed if the received document is longer
than the fax paper.
2: OFF Auto reduction is not performed.
2. Press the enter key. The value is set.
3. To return to the screen for selecting an item, press the back key.
Setting the automatic printing of the protocol list
Sets if the protocol list is automatically printed out.
1. Change the setting using the up/down cursor keys.
Display Description
1: OFF The protocol list is not printed out automatically.
2: ERROR The protocol list is automatically printed out after
communication only if a communication error occurs.
3: ON The protocol list is automatically printed out after
communication.
2. Press the enter key. The value is set.
3. To return to the screen for selecting an item, press the back key.
Completion
Press the back key at the screen for selecting an item. The screen for selecting a maintenance item No. is
displayed.