Kyocera KM-1820

3JG
1-3-5
Maintenance
Description
item No.
Destination code list
Japan
Australia
Hong Kong
Indonesia
Israel
Malaysia
New Zealand
Peru
Philippines
Middle East
Singapore
Code
000
009
080
084
088
108
126
136
137
152
156
South Africa
Thailand
U.S.A.
South America
Saudi Arabia
CTR21 (European nations)
Italy
Germany
Spain
U.K.
Netherlands
159
169
181
242
243
253
Code
Destination
Destination
Sweden
France
Austria
Switzerland
Belgium
Denmark
Finland
Portugal
Ireland
Norway
Taiwan
Code
253
254
Destination
U600
(cont.)
U601 Initializing permanent data
Description
Initializes software switches on the fax control PWB according to the destination and OEM.
Purpose
To initialize the fax control PWB without changing user registration data.
Method
1. Press the enter key. The screen for selecting an item is displayed.
2. Select Execute using the up/down cursor keys.
3. Press the enter key. The screen for entering the destination code is displayed.
Enter a destination code using the numeric keys (refer to the destination code list on page 1-3-5 for the
destination code).
Ini. Keep data
COUNTRY CODE:000
4. Press the enter key. The screen for entering the OEM code is displayed.
There is no operation necessary on this screen.
Ini. Keep data
OEM CODE:000
5. Press the enter key. Data initialization starts. To cancel data initialization, press the back key.
6. After data initialization, the entered destination, OEM codes and ROM version are displayed. A ROM
version displays three kinds, application, IPL, and boot.
Ini. Keep data
COMPLETED 000 000
APLI:
****************
BOOT:
****************
IPL:
****************