Kyocera KM-1820

3JG
1-3-4
(3) Contents of maintenance mode items
Maintenance
Description
item No.
U600 Initializing all data
Description
Initializes software switches and all data in the backup data on the fax control PWB, according to the
destination and OEM.
Executes the check of the file system, when abnormality of the file system is detected, initializes the file system,
communication past record and register setting contents.
Purpose
To initialize the fax control PWB.
Method
1. Press the enter key.
2. Select Execute using up/down cursor keys.
3. Press the enter key. The screen for entering the destination code is displayed.
Enter a destination code using the numeric keys (refer to the destination code list on page 1-3-4 for the
destination code).
Ini. All data
COUNTRY CODE:000
4. Press the enter key. The screen for entering the OEM code is displayed.
There is no operation necessary on this screen.
Ini. All data
OEM CODE:000
5. Press the enter key. Data initialization starts. To cancel data initialization, press the back key.
6. After data initialization, the entered destination, OEM codes and ROM version are displayed. A ROM
version displays three kinds, application, IPL, and boot.
Ini. All data
COMPLETED 000 000
APLI:
****************
BOOT:
****************
IPL:
****************