Maintenance
Description
item No.
3JG
1-3-12
Setting the waiting period to prevent echo problems at the receiver
Sets the period before an NSF, CSI or DIS signal is sent after a CED signal is received. Used when problems
occur due to echoes at the receiver.
1. Change the setting using the up/down cursor keys.
Display Description
1: 500 Sends an NSF, CSI or DIS 500 ms after receiving a CED.
2: 75 Sends an NSF, CSI or DIS 75 ms after receiving a CED.
2. Press the enter key. The value is set.
3. To return to the screen for selecting an item, press the back key.
Completion
Press the back key at the screen for selecting an item. The screen for selecting a maintenance item No. is
displayed.
U630
(cont.)
To Next Page
Loading...
