Kyocera KM-1820 - Page 272

3JG
2-2-7
Connector Pin No. Signal I/O Voltage Description
YC1
Connected
to the fax
control
PWB.
A1 LINE1 I/O - Line signal
A2 LINE1 I/O - Line signal
A3 N.C - - Not used
A4 N.C - - Not used
A5 N.C - - Not used
A6 GND - - Ground
A7 GND - - Ground
A8 GND - - Ground
A9 GND - - Ground
A10 GND - - Ground
A11 GND - - Ground
A12 +5VDC I 5 V DC 5 V DC supply
A13 +5VDC I 5 V DC 5 V DC supply
A15 +5VDC I 5 V DC 5 V DC supply
B1 LINE2 I/O - Line signal
B2 LINE2 I/O - Line signal
B3 N.C - - Not used
B4 N.C - - Not used
B5 N.C - - Not used
B6 TELSEL I 5 V DC TELSEL signal
B7 TELSEL2 I - Not used
B8 ILOOPUP I - Not used
B9 ILOOPUP2 I - Not used
B10 EARTH I 5 V DC Ground start control signal
B12 TELOFHKn O 5 V DC External line off-hook detection signal
B13 DCCONT I 5 V DC DC/DCconverter control signal