Kyocera KM-1820 - Page 89

2GM
1-5-20
(14)Image is partly miss-
ing.
Causes
1. Paper damp.
2. Paper creased.
3. Flawed drum.
Causes Check procedures/corrective measures
1. Paper damp. Check the paper storage conditions.
2. Paper creased. Replace the paper.
3. Flawed drum. Replace the process unit.
(13)Offset occurs.
(12)Paper creases. Causes
1. Paper curled.
2. Paper damp.
Causes Check procedures/corrective measures
1. Paper curled. Check the paper storage conditions.
2. Paper damp. Check the paper storage conditions.
Causes
1. Defective cleaning blade.
Causes Check procedures/corrective measures
1. Defective cleaning blade. Replace the process unit.