Troubleshooting
OPERATION GUIDE 8-13
8
Optional Document Processor (J70 to J75 and J78)
When the paper misfeed has occurred in the optional Document Processor, use the procedure below to clear it
1 Remove all of the originals remaining in the original
table.
2 Open the left cover.
3 Remove the jammed original without tearing it.
NOTE: If the original does happen to tear, remove any
loose scraps from inside the document processor.
Failure to do so may cause another paper jam later.
4 Raise the paper feed unit A.
5 Remove the jammed originals without tearing
them.
NOTE: If the original does happen to tear, remove any
loose scraps from inside the document processor.
To Next Page
Loading...
