4-12
Printing from PC > Using Print Box
Saving Document to a Print Box
Use the procedure below to save a document in the Print Box created on the PC. Print Box can be selected from [Box
01] to [Box 30]. To use the other boxes or to change the default box name, configure the settings on KYOCERA Client
Tool. Refer to Default Settings on the PC (
KYOCERA Client Tool) on page 7-22.
In addition, a PIN code can be set for a Print Box. Since the PIN code must be entered when printing at the machine,
security is enhanced.
1
Start KYOCERA Client Tool on the Host PC.
Click [Start] button on the Windows and then select [All Programs], [Kyocera], [Client Tool]
and [KYOCERA Client Tool] to start KYOCERA Client Tool.
2
Display the screen on your PC.
1 Click [File] and select [Print] in the application.
2 Select the machine from the "Name" menu and click [Properties].
3 Select the [Job] tab.
3
Configure the settings.
1 Select [Print Box] then select the Print Box where the print job should be stored from the
[Box 01] to [Box 30].
2 As necessary, set the job name for the print job.
4
Start printing.
Select [OK] to return to the "Print" screen and click [OK] to start storing.
In Windows 8, select [Search] in charms, [Apps], and then [KYOCERA Client Tool].
To Next Page
Loading...
