Kyocera TASKalfa 2201 - Edit Destination; Adjust;Maint. (Adjustment;Maintenance)

7-21
System Menu and KYOCERA Client Tool > Default Settings on the Machine (System Menu)
Edit Destination
Configure settings for Address Book. For details, refer to the FAX Operation Guide
*1
.
*1 FAX is an option.
Adjust/Maint. (Adjustment/Maintenance)
Adjust printing quality and conduct machine maintenance.
Edit Destination
Adjust/Maint.
Item Description
Adjust/
Maint.
Density Adj. Adjust density.
Copy Adjust copy density. Adjustment can be made in 7 levels.
Value: +3 Darker, +2, +1, 0 Normal, -1, -2, -3 Lighter
Scan/FAX Adjust scan density. Adjustment can be made in 7 levels.
Value: +3 Darker, +2, +1, 0 Normal, -1, -2, -3 Lighter
Backgrnd Density Darkens or lightens overall background density adjustment.
Copy Darkens or lightens overall background density adjustment during copying. Adjustment
can be made in 7 levels.
Value: +3 Darker, +2, +1, 0 Normal, -1, -2, -3 Lighter
Scan/FAX Darkens or lightens overall background density when scanning images. Adjustment can
be made in 7 levels.
Value: +3 Darker, +2, +1, 0 Normal, -1, -2, -3 Lighter
Print Density Adjust print density. Adjustment can be made in 5 levels.
Value: 5 (Darker), 4, 3, 2, 1 (Lighter)
Correct. Bk Line Correct fine lines (streaks caused by contamination), which may appear on the image,
when the document processor is used.
Value
Off: No correction performed.
On: Correction performed. The reproduction of fine lines on the original may
become lighter than when using [Off].
Service Setting ―
Drum Refresh Remove white lines from the image.
Press the [OK] key and then press [Yes] to perform Drum Refresh.