Scan, Print Box, and device monitoring will be disabled while the [Scan] window is open.
Item Description
Destination number Select the destination number (1 to 30) to be registered. When a destination number is selected, the
settings registered in that number appear in the right-hand screen.
Summary Shows a list of the settings of the selected program.
Display name Set a name for the destination. Up to 16 characters can be entered. This name is displayed when you
select a destination on the machine operation panel.
Connection Settings Select the interface used to connect with the machine.
When connecting the machine to the PC on the network, configure the host name or IP address of the
PC in use.
*1
Refer to When Connecting the Machine to the PC on the Network on page 2-42.
*1 The optional Network Interface Kit is required.
Original size Specify the size of originals being scanned.
Value: Auto, A3, A4, A5, A6, B4, B5 (JIS), B6, Folio, 216 × 340 mm, Ledger, Letter, Legal,
Statement, 11 × 15", Oficio II, 8K, 16K, Hagaki, Ofuku Hagaki, Custom
Refer to Custom Orig.Size on page 7-12 for selecting [Custom].
Original image Select image quality suited to the type of original.
Value:
Duplex
*2
*2 The optional document processor is required.
Set duplex of original.
Value:
Original orientation Select the orientation of the original document top edge to scan correct direction.
Value:
Sharpen Adjust the sharpness of the image.
Value: None, Low, Medium, High, Descreen (Blurs the outlines and reduces the sharpness.)
Scan color Select the color mode setting.
Value: Monochrome, Grayscale, Full color
To Next Page
Loading...
