Kyocera TASKalfa 2201 - Bonjour Settings

2-18
Installing and Setting up the Machine > Default Settings of the Machine
Bonjour Settings
Configure the settings for Bonjour.
1
Display the screen.
1 Press the [Status/System Menu/Counter] key.
2 Press the [▲] or [▼] key to select [System], and press the [OK] key.
3 Press the [▲] or [▼] key to select [Network Setting], and press the [OK] key.
4 Press the [▲] or [▼] key to select [TCP/IP Settings], and press the [OK] key.
2
Configure the settings.
1 Press the [▲] or [▼] key to select [Bonjour], and press the [OK] key.
NOTE
If the login user name entry screen appears during operations, log in by referring to
Administrator User Name and Password
on page 2-10.
The factory default login user name and login password are set as shown below.
21
Status/Sys. Menu:
System
Exit
04
Counter
03
Report
02
Login User Name Login Password
Admin
*1
*1 Upper case and lower case letters are distinguished (case sensitive).
Admin
*1
21
System:
Network Setting
Exit
01
I/F Block Set.
02
21
Network Setting:
TCP/IP Settings
Exit
01
Secure Protocol
02
LAN Interface
03
21
TCP/IP Settings:
IPv4 Setting
Exit
02
IPv6 Setting
03
Bonjour
04