Kyocera TASKalfa 2201 - Administrator Setting

2-11
Installing and Setting up the Machine > Administrator User Name and Password
Administrator Setting
Change the login user name and login password for the administrator.
1
Display the screen.
1 Press the [Status/System Menu/Counter] key.
2 Press the [▲] or [▼] key to select [Admin/Accounting], and press the [OK] key.
3 Press the [▲] or [▼] key to select [Admin. Setting], and press the [OK] key.
2
Configure the settings.
1 Press the [OK] key.
2 Press [Edit].
NOTE
If the login user name entry screen appears during operations, log in by referring to
Administrator User Name and Password
on page 2-10.
The factory default login user name and login password are set as shown below.
Status/Sys. Menu:
Counter
Exit
03
Admin/Accounting
04
05
System
21
Login User Name Login Password
Admin
*1
*1 Upper case and lower case letters are distinguished (case sensitive).
Admin
*1
Admin/Accounting:
Admin. Setting
Exit
01
Job Account.Set.
02
Unknown ID Job
03
21
Admin. Setting:
Admin
Login User Name:
Admin
Detail:
1/ 2
Edit