Kyocera TASKalfa 2201 - Quick Scan;TWAIN Settings

7-29
System Menu and KYOCERA Client Tool > Default Settings on the PC (KYOCERA Client Tool)
Quick Scan/TWAIN Settings
Configure the Quick Scan/TWAIN settings on [Preferences] or [Quick Scan Settings] of the [Scan] tab.
TWAIN Settings
Item Description
Preferences Change the TWAIN scan settings. This setting is effective for Quick Scan only.
Quick Scan Settings Change the settings for Scan to PDF, Scan to E-mail and Scan to Folder.
No. Item Description
1 Original size Specify the size of originals being scanned.
Value: Auto, A3, A4, A5, A6, B4, B5 (JIS), B6, Folio, 216 × 340 mm, Ledger, Letter, Legal,
Statement, 11 × 15", Oficio II, 8K, 16K, Hagaki, Oufukuhagaki, Custom
NOTE
Refer to Custom Orig.Size on page 7-12 for selecting [Custom].
2 Feed method
*1
*1 The optional document processor is required.
Select the original feed method.
Value: Auto, Document Processor, Platen, 2-sided (Binding Top), 2-sided (Binding Left/Right)
3 Scan color Select the color mode setting.
Value: Monochrome, Grayscale, Full color
4 Resolution Select fineness of scanning resolution.
Value: 200 × 200 dpi, 300 × 300 dpi, 400 × 400 dpi, 600 × 600 dpi
NOTE
[400×400dpi] and [600×600dpi] can be set only if [Monochrome] is set for Scan color.
5 Orientation Select the Orientation of the original document top edge to scan correct direction.
Value: Portrait (Top Edge Top), Portrait (Top Edge Left), Landscape (Top Edge Top), Landscape
(Top Edge Left)
6 Sharpen Adjust the sharpness of the image.
Value: None, Low, Medium, High, Descreen (Blurs the outlines and reduces the sharpness.)
1
3
4
10
6
7
8
9
14
2
5
12
13
11