2-34
Installing and Setting up the Machine > Installing Software
Installing Software in Mac Computer
Only the machine's printer functionality can be used by a Mac computer.
1
Insert the Product Library disc.
Double-click the [Kyocera] icon.
2
Display the screen.
Double-click [OS X 10.5 or higher] and [Kyocera OS X 10.5+].
3
Install the Software.
Install the printer driver as directed by the instructions in the installation software.
This completes the printer driver installation.
If a USB connection is used, the machine is automatically recognized and connected. If an IP
connection is used, the settings below are required.
• Installation on Mac OS must be done by a user logged on with administrator privileges.
• When the optional Network Interface Kit is installed, connection can be established by using Bonjour. If connecting
by Bonjour, enable Bonjour in the machine's network settings.
Bonjour Settings (page 2-18)
• In the Authenticate screen, enter the name and password used to log in to the operating system.
To Next Page
Loading...
