Kyocera TASKalfa 2201 - System; Network Setting

7-6
System Menu and KYOCERA Client Tool > Default Settings on the Machine (System Menu)
Admin Rpt Set. (Admin Report Settings) / Result Rpt Set. (Result Report
Settings)
Configure settings for fax functions. For details, refer to the FAX Operation Guide
*1
.
*1 FAX is an option.
System
Configure machine system settings.
Network Setting
Configure network settings.
TCP/IP Settings
Report
Admin Rpt Set.
Result Rpt Set.
NOTE
This function is displayed when the optional Network Interface Kit is installed.
System Network Setting TCP/IP Settings
Item Description
TCP/IP
Settings
TCP/IP Select whether to use TCP/IP Protocol.
Value: Off, On
IPv4 Setting Set up TCP/IP (IPv4) to connect to the network. This setting is available when [TCP/IP]
is set to [On].
DHCP Select whether to use the DHCP (IPv4) server.
Value: Off, On
Auto-IP Select whether to use Auto-IP.
Value: Off, On
IP Address Set the IP addresses.
Value: ###.###.###.###
NOTE
If DHCP is set to [On], this item is displayed only and cannot be entered.
Subnet Mask Set the IP subnet masks.
Value: ###.###.###.###
NOTE
If DHCP is set to [On], this item is displayed only and cannot be entered.
Default Gateway Set the IP gateway addresses.
Value: ###.###.###.###
NOTE
If DHCP is set to [On], this item is displayed only and cannot be entered.