5-15
Operation on the Machine > Copying
When placing the original on the platen, consecutively replace each original and press the [Start] key.
After scanning all originals, press [End Scan]. Copying begins.
2-sided>>2-sided ― Press the [OK] key to copy the original with the default setting. For the default
settings, refer to Function Default on page 7-18.
Orig. Binding Left/Right, Top Press [Detail] to display the [Orig. Binding] screen.
Select the binding direction of originals, and press the [OK] key.
Finish. Binding Left/Right, Top Select the binding orientation of copies, and press the [OK] key.
Orig. Orientation Top Edge on Top,
Top Edge on Left
Select the orientation of the original document top edge to scan correct direction.
Choose orientation of the originals, either [Top Edge on Top] or [Top Edge on
Left]. Then press the [OK] key.
Book>>1-sided ― Press the [OK] key to copy the original with the default setting. For the default
settings, refer to Function Default on page 7-18.
Orig. Binding Left, Right Press [Detail] to display the [Orig. Binding] screen.
Select the binding direction of originals, and press the [OK] key.
Book>>2-sided ― Press the [OK] key to copy the original with the default setting. For the default
settings, refer to Function Default
on page 7-18.
Orig. Binding Left, Right Press [Detail] to display the [Orig. Binding] screen.
Select the binding direction of originals, and press the [OK] key.
Item Value Description
To Next Page
Loading...
