Kyocera TASKalfa 2201 - Page 172

7-8
System Menu and KYOCERA Client Tool > Default Settings on the Machine (System Menu)
Secure Protocol
TCP/IP
Settings
Protocol Detail Select the settings for Protocol Detail.
SMTP Select whether to send E-mail using SMTP.
Value: Off, On
WSD-PRINT Select whether to use WSD Print.
*1
Value: Off, On
LPD Select whether to receive documents using LPD.
*1
Value: Off, On
RAW Port Select whether to receive documents using Raw Port.
*1
Value: Off, On
IPP Select whether to receive documents using IPP.
*1
Value: Off, On
IPP over SSL Select whether to receive documents using IPP over SSL.
*1
Value: Off, On
HTTP Select whether to communicate using HTTP.
*1
Value: Off, On
HTTPS Select whether to communicate using HTTPS.
*1
Value: Off, On
SNMP Select whether to communicate using SNMP.
*1
Value: Off, On
SNMPv3 Select whether to communicate using SNMPv3.
*1
Value: Off, On
Enhanced WSD Select whether to use Enhanced WSD.
*1
Value: Off, On
EnhancedWSD
(SSL)
Select whether to use Enhanced WSD (SSL).
*1
Value: Off, On
NOTE
Selecting [Off] will disable the SSL capability of TWAIN drivers.
*1 The setting will be changed after restarting the device or network.
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
System Network Setting Secure Protocol
Item Description
Secure Protocol SSL Select whether to use SSL for communication.
Value: Off, On
Item Description