To specify border erase widths around original, set the value in [Border]. To specify
border erase widths in the middle of original, set the value in [Gutter].
Margin Set the default margin.
Value
Metric
Left/Right: -18 to 18 mm (in 1 mm increments)
Top/Bottom: -18 to 18 mm (in 1 mm increments)
Inch
Left/Right: -0.75 to 0.75" (in 0.01" increments)
Top/Bottom: -0.75 to 0.75" (in 0.01" increments)
Backgrnd Density Set the default Background Density (Copy).
Value: Off, On
EcoPrint Select the EcoPrint default.
Value: Off, On
Auto Rotation Select the default Auto Rotation setting.
Value: Off, On
File Name Entry Set an automatically entered name (default) for jobs. Additional information such as
Date and Job No. can also be set.
Value
File Name Entry: Up to 32 characters can be entered.
Additional Info.: None, Date, Job No., Job No. + Date, Date + Job No.
Continuous Scan Set the continuous scan defaults.
Value: Off, On
Detail Setting Set the defaults for the following detail settings:
2 in 1 Layout Set the default for the 2-in-1 layout of Combine copies.
Value: L to R T to B, R to L
4 in 1 Layout Set the default for the 4-in-1 layout of Combine copies.
Value: Right then Down, Down then Right, Left then Down, Down then Left
Border Line Set the default for the border line of Combine copies.
Value: None, Solid Line, Dotted Line, Positioning Mark
Orig. Binding
*1
*1 Displayed only when the optional document processor is installed.
Set the default for the binding orientation of two-sided originals to produce two-sided
copies.
Value: Left/Right, Top
BookOrg.
Binding
Set the default for the binding orientation of open book originals to produce two-sided
copies.
Value: Left, Right
Finish. Binding Set the default for the binding orientation of finished two-sided copies.
Value: Left/Right, Top
To Next Page
Loading...
