Kyocera TASKalfa 2201 - Page 49

2-21
Installing and Setting up the Machine > Default Settings of the Machine
3 Press the [▲] or [▼] key to select [Timer Setting], and press the [OK] key.
4 Press the [▲] or [▼] key to select [Sleep Timer], and press the [OK] key.
2
Set the sleep time.
Use the numeric key or press the [▲] or [▼] key to enter the sleep time, and press the [OK]
key.
NOTE
If the login user name entry screen appears during operations, log in by referring to
Administrator User Name and Password
on page 2-10.
The factory default login user name and login password are set as shown below.
21
Common Settings:
Date Setting
Exit
09
Timer Setting
11
Error Handling
10
Login User Name Login Password
Admin
*1
*1 Upper case and lower case letters are distinguished (case sensitive).
Admin
*1
21
Timer Setting:
Err. Clear Timer
Exit
01
Sleep Timer
02
PanelReset Timer
03
Sleep Timer:
1
(1 - 60)
min.