Kyocera TASKalfa 820 - Creating Punch Holes for a Print Job; Separation; Rotate Copies

CreatingPunchHolesforaPrintJob
Separation
RotateCopies
RotatingCopies
Finishing
ThefinishingdevicemustsupportthePunchfeature.
AvailablepunchoptionsaresetintheDeviceSettingstabanddependonthe
punchunitinstalledonthedeviceandselected.
1
Fromtheapplication’sPrintdialogbox,openProperties.
2
IntheBasictab,underDestination,selectaface-uporface-downfinishing
tray.
3
SelecttheFinishingtab,andclickPunch.
4
Selectthenumberofholepunches:2or4hole(metric),or2or3hole(inches).
5
ClickSettings,andselectthesettingforpunchposition:Left(sideofthepage),
Right(sideofthepage),orUpper(topedge,inthecenterofthepage)
Theprintjobwillbepunchedbythefinishingdeviceanddeliveredtotheoutput
tray.
TheSeparationfeaturestacksprintjobssothatoneprintjobcanbe
distinguishedfromanother.
SelectRotatecopiestoprinteachcopyofaprintjobatrightangles.
SelectOffsetjobstophysicallyshifteachprintjobintheoutputtray.Toensure
consistentoffsetstacking,allusersprintingtothesameprintingsystemshould
selectOffsetjobsasthedefaultsetting.
Rotatecopiesstackseachcopyofaprintjobatarightangleintheoutputtray.
Thisfeaturerequiresthefollowing:
PapersizeselectionsarelimitedtoLetter,A4,16K,orB5(JIS).
Theselectedpapersizemustbeloadedintotwopapersources,one
horizontallyandonevertically.
Theprintjobmustcontainmultiplepagesandbespecifiedtoprintmultiple
copies.
Rotatecopiesstackseachcopyofaprintjobatrightangles.
1
IntheBasictab,underDestination,selectanoptionthatisnotafinishingtray,
forexample:Toptray(face-down).
2
Selectanumberofcopiesgreaterthan1.
3
ClicktheFinishingtab,thenselectSeparation>Rotatecopies.
4
ClickOKtoreturntothePrintdialogbox.
KXDriver
6-3