Kyocera Torque - Settings; Wi-Fi Settings

Tools and Calendar 158
1.
PressHome >Menu >System settings>Bluetooth.
2.
IfBluetoothisnotswitchedon,touchtheofficon toturnBluetoothon.
3. Makesurethattheheadsetisdiscoverable.
4. Touchtheheadset’snameinthePAIRED DEVICESlist.
5. Ifpromptedtoenterapasscode,try0000or1234,orconsulttheheadsetorcarkit
documentationtofindthepasscode.
6. Ifyoustillcannotreconnecttotheheadsetorcarkit,followtheinstructionsinDisconnector
UnpairfromaBluetoothDevice,andthenfollowtheinstructionsinConnectaBluetoothHeadset
orCarKit.
Disconnect or Unpair from a Bluetooth Device
YoucanmanuallydisconnectorunpairfromaBluetoothdevicethroughtheBluetoothsettings
menu.
Disconnect a Bluetooth Device
1.
PressHome >Menu >System settings>Bluetooth.
2. OnthePAIRED DEVICESlist,touchthedeviceyouwanttodisconnect.
3. TouchOK.
Unpair from a Bluetooth Device
YoucanmakeyourphoneforgetitspairingconnectionwithanotherBluetoothdevice.Toconnectto
theotherdeviceagain,youmayneedtoenterorconfirmapasscodeagain.
1.
PressHome >Menu >System settings>Bluetooth.
2.
OnthePAIRED DEVICESlist,touch nexttothedeviceyouwanttounpair.
3. TouchUnpair.
Send and Receive Information Using Bluetooth
YoucanuseBluetoothtotransferinformationbetweenyourphoneandanotherBluetooth-enabled
devicesuchasaphoneornotebookcomputer.Thefirsttimeyoutransferinformationbetweenyour
phoneandanotherdevice,youneedtoenterorconfirmasecuritypasscode.Afterthat,yourphone
andtheotherdevicearepaired,andyouwillnotneedtoexchangepasscodestotransferinformation
inthefuture.
Send Information from Your Phone to Another Device
Youcansendthefollowingtypesofinformation,dependingonthedeviceyouaresendingto: