Kyocera Torque - Answer Direct Connect Calls

Sprint Direct Connect 54
1. Withthenotificationdisplayed,pressandholdtheDC Button.
2. ContinuewiththeDirectConnectcallaspreviouslydetailed.
Toplaceavoicecall:
n PresstheSpeaker Button.
Todismissanotification:
n TouchIgnore.
Answer Direct Connect Calls
WhenyoureceiveaDirectConnectcall,youhearanincomingtoneorthephonevibrates,
dependingonyoursettings.YouwillseetheDirectConnectnumberandthecaller’sname(if
available)onyourscreen.Youmayalsohearthecaller’svoicethroughthespeakerphone.Default
forDirectConnectcallsisspeakerphoneon.YoucanturnthespeakerphoneoffandlistentoDirect
Connectcallsthroughtheearpieceasyouwouldaregularcall,oryoucanlistenthroughaheadset.
1. PresstheSpeaker ButtontoeitherenableordisabletheDirectConnectspeakerphone
feature.
l
IfyouenabletheDirectConnectspeakerphone( ),youwillhearthecaller’svoice
throughthespeakerphoneonthefrontofthephone.
l
IfyoudisabletheDirectConnectspeakerphone( ),youwillonlyhearthecaller’svoice
throughtheearpiece.
2. Accepttheincomingcall.Ifavailable,thecaller’snameandDirectConnectnumberalsoappear
onthedisplay.
3. Whenthecallerhasfinishedspeaking,youwillhearatoneandsee“Push to Talk”onthe
display.
4. PressandholdtheDC Buttonandwaitforatonetosoundandamessage(“Me”)toappear
onscreen.ContinuetheDirectConnectcallasdescribedpreviously.
Tip:Touch todismissanincomingDirectConnectcall.
Tip:PressMenu >BluetoothtoroutetheaudiothroughapairedBluetoothdevice.
Convert a Direct Connect Call to a Phone Call
1. WhileonaDirectConnectcall,touchConvert call.
2. Readthemessage,andthenselectanumber(ifmorethantwonumbersareavailable)ortouch
Convert call.YourphoneendstheDirectConnectcallanddialstheselectednumber.