Kyocera Torque - Page 67

Sprint Direct Connect 57
Make a Group Connect Call from Contacts
1.
PressHome > >People> .
2.
Touch nexttothegroupentryyouwanttoplaceaGroupConnectcallto.
3. ContinuetheGroupConnectcallinthesamemannerasaone-to-oneDirectConnectcall.
Note:OnlyonepersonatatimemayspeakonaGroupConnectcall.
4.
Whenyouarefinished,touch toendthecall.(Bydefault,whenyouendaGroupConnect
callthatyouinitiated,allotherparticipantsaredroppedfromthecall.Tochangethisoption,see
GroupCallOptions.)
Note:Ifyougetanerrormessagesayingthatyourcontact“isnotreachableviaDirectConnect”or
“thisnumberisnotDCcapable,”pleasechecktoseethatyouhaveenteredorhighlightedavalid
DirectConnectnumber.
Make a Group Connect Call from Recent DC’s
1.
PressHome > > .
2.
Touch nexttothegroupentryyouwanttoplaceaGroupConnectcallto.
3. ContinuetheGroupConnectcallasdescribedpreviously.
Make a Group Connect Call from the DC Call List
1.
PressHome > > .
2. TouchagroupentrytoplaceaGroupConnectcall.
3. ContinuetheGroupConnectcallasdescribedpreviously.
Make a Group Connect Call without Saving the Group
1.
PressHome > >People> or .
–or–
PressHome > > or .
2.
PressMenu >DC Multiple.
3. SelectentriesfromthePeoplelist.