Kyocera Triumph-Adler P-4025w - Registering Permit FAX no

8-11
Fax Settings > Transmission Restriction
Registering Permit FAX No.
1
Display the screen.
[System Menu/Counter] key > [▲] [▼] key > [FAX] > [OK] key > [▲] [▼] key >
[TX/RX Restrict.] > [OK] key > [▲] [▼] key > [Permit No. List] > [OK] key
2
Add a permit fax number.
1 [Menu] > [▲] [▼] key > [Add FAX Number] > [OK] key
2 Use the numeric keys to enter a Permit FAX number.
3 Select the [OK] key.
3
To register another permit fax number, repeat Steps 2-1 to 2-3.
Prerequisites
Reception Rejection
Requirements
Reception
Rejection
• Register Reject FAX numbers.*
Registering Reject FAX No. (page 8-13)
• Reception restriction settings are specified
in [Reject List] in Reception Restrictions.
Setting Reception Restriction (page 8-16)
* If there are no Reject FAX numbers registered, calls are only rejected from senders whose Local FAX
Numbers (Indicates local FAX information entries, not the actual line numbers.) are not registered.
• The sender’s Local FAX
Number is not registered.
• The sender’s Local Fax
Number matches a Reject FAX
No. registered on the machine.
NOTE
Up to 25 Permit FAX numbers can be registered.
NOTE
Up to 20 digits can be entered.