L-Acoustics A10 - Attaching K2-JACK Stabilizers to KS21-CHARIOT

Rigging procedures
Attaching K2-JACK stabilizers to KS21-CHARIOT
Type of deployment stacked array
Rigging accessory K2-JACK
KS21-CHARIOT
Min number of operators 1
Assembly
Procedure
1. Attach the K2-JACK bars to KS21-CHARIOT on each side.
a) Open the locking handles to insert the studs.
b) Raise and turn the locking handles to secure the bars.
94 A10 owner's manual (EN) version 1.1