Rigging procedures
Rigging procedures
Flying
Flying a vertical array
Type of deployment own array
for A10 Wide/Focus: A10-BUMP/A10-RIGBAR
for KS21: A15-BUMP/A15-RIGBAR
Rigging accessory
2 x Ø12 mm shackle WLL 1 t (provided)
Min number of operators 2
Risk of falling objects
Verify that no unattached items remain on the product or assembly.
Secondary safety
Use available holes on the rigging accessories to implement a secondary safety.
A10 Wide/Focus array
Procedure
1. Stack up to three enclosures.
Connect each enclosure on both sides before adding the new one.
SHLAK!
70 A10 owner's manual (EN) version 1.1
To Next Page
Loading...
