Product Service 1-800-522-7658
Quickstart
How do I see the Current Configuration of the Logic+?
1. Press the
Menu
button.
2. Press the ▼ button until the
Services
option is highlighted (it will
turn yellow).
3. Press
OK/Mute
to enter the Services menu screen.
4. Press the ▼ button until the
Current Settings
option is
highlighted (it will turn white).
5. Press
OK/Mute
to see the configuration.
6. If you are recertifying the unit, you may want to record the data
on this screen. The firmware revision is shown in the bottom
right corner as a -, or as a letter.
MAIN MENU
1. MyLogic
TM
2. Settings
3. Service
or to choose,
OK to select, MENU to escape
or to choose,
OK to select, MENU to return
Current Settings
Restore Default
Diagnostics
Calibration
Configuration
Service
To Next Page
Loading...
Need help?
General
